Center NETSI offers:

      Alongside with the conventional types of coatings and technologies for their deposition from non-ferrous refractory metals, steels and alloys, nitrides, carbides, carbo-nitrides a few unique deposition technologies of coatings (including special methods for sputtering multicomponent film materials from mosaic targets) have been worked out and are offered to our customers:

  • Coatings of various purposes from alloys which are impossible to produce by the conventional metallurgical method, for example: W-Cu, Ta-Cu, Cr-C.

  • Coatings from 2, 3, etc. nitrides, without using the metallurgical method for manufacturing targets from alloys possessing a high brittleness and a low plasticity, for example: (Ti-Al)N, (Zr-Ti-Al)N

  •  Coatings from carbides, including complex (2, 3 & 4 components), passing by reactive interaction carbon gases with metal vapour.

  •  Coatings from carbides, including complex (2, 3 & 4 components), passing by reactive interaction carbon gases with metal vapour.

  • Coatings from carbo-nitrides, including complex (2, 3 & 4 components), passing by the stage of forming  carbides due to reacting metal with carbon - containing gases.

  • Composite coatings such as лЕ-я, лЕ-б, лЕ-я-б, лЕ-лЕн with nano-crystal structure.

  • Hard-alloy coatings such as WC-Co, W-Ti-C-Co with nano-crystalline structure.

  • Hard-alloy coatings such as WC-Co, W-Ti-C-Co with nano-crystalline structure.

  • Hard solid lubricant coatings on the basis of Me-C where the metal share is 5-10 atom%.

  • Hard solid lubricant coatings on the basis of MoS2, WS2, NbS2+MeN or MeC.

  • DLC coatings on the basis of  i-C + MeC

  • Coatings from magnetic materials: steels of ferritic and ferritic-martensitic classes, magnetic metals: Fe, Ni, Co, and ⌠hard■ magnetic (coating sputtering at a high deposition rate up to 50-100 microns/hr).     

                                                                       

 

 

 

Hosted by uCoz